Dual stack IPv4/IPv6 on FreeBSD

Here is a quick note to show how easy it is to enable a dual IP stack on FreeBSD (and actually on most modern system)…

Here is what you need :

1. Native connectivity to IPv4 & IPv6 backbones

Connectivity to IPv4 should be OK. If you don’t have connectivity to IPv6 you may want to use 6in4 tunnel to connect to IPv6 backbone through a tunnel over IPv4 backbone. Several tunnel brokers are available for free, I personally know Hurricane Electric and SixXS.

2. An IPv4 gateway such as 192.168.1.1
3. An IPv4 address in that range such as 192.168.1.10
4. An IPv6 gateway such as 2001:db8:abcd::1
5. An IPv6 address in that range such as 2001:db8:abcd::e
6. Put all together in /etc/rc.conf

Extract from /etc/rc.conf

#IPv4 config
ifconfig_re0="inet 192.168.1.10 netmask 255.255.255.0"
static_routes="default"
route_default="default 192.168.1.1"

#IPv6 config
ipv6_enable="YES"
ipv6_ifconfig_re0="2001:db8:abcd::e/56"
ipv6_static_routes="default"
ipv6_route_default="default 2001:db8:abcd::1"

Then restart the server or the network related script from /etc/rc.d

ipv6#/etc/rc.d/netif start
re0: flags=8843 metric 0 mtu 1500
	options=9b
	ether 9e:65:96:1e:ca:5e
	inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (100baseTX )
	status: active

ipv6#/etc/rc.d/routing start
add net default: gateway 192.168.1.1
Additional routing options:.

ipv6# /etc/rc.d/network_ipv6 start
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding: 0 -> 0
re0: flags=8843 metric 0 mtu 1500
	options=9b
	inet6 2001:db8:abcd::e prefixlen 56 tentative
plip0: flags=108810 metric 0 mtu 1500
lo0: flags=8049 metric 0 mtu 16384
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net default: gateway 2001:db8:abcd::1
IPv4 mapped IPv6 address support=NO

You may notice the IPv6 address is marked as tentative, that’s because DAD (Duplicate Address Detection) is still validating the IPv6 address. If you run ifconfig a bit later and if you IPv6 is not a duplicate address, the tentative flag should disappear.

Test connectivity with some awesome tools…

ipv6# ping -c3 www.google.com
PING www.l.google.com (209.85.229.147): 56 data bytes
64 bytes from 209.85.229.147: icmp_seq=0 ttl=55 time=10.624 ms
64 bytes from 209.85.229.147: icmp_seq=1 ttl=55 time=10.675 ms
64 bytes from 209.85.229.147: icmp_seq=2 ttl=55 time=10.815 ms

--- www.l.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 10.624/10.705/10.815/0.081 ms

ipv6# ping6 -c3 ipv6.google.com
PING6(56=40+8+8 bytes) 2001:db8:abcd::e --> 2a00:1450:8006::93
16 bytes from 2a00:1450:8006::93, icmp_seq=0 hlim=56 time=15.562 ms
16 bytes from 2a00:1450:8006::93, icmp_seq=1 hlim=56 time=15.529 ms
16 bytes from 2a00:1450:8006::93, icmp_seq=2 hlim=56 time=15.541 ms

--- ipv6.l.google.com ping6 statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 15.529/15.544/15.562/0.014 ms

Congratulations, you now have IPv4 and IPv6 connectivity from your FreeBSD box!

Tags: IPv6, Systems